Guides · CombiSteel Knowledge Hub
CombiSteel EC1 vs 4×GN 1/1 Convection Ovens: Energy Load vs Usable Tray Capacity
Compare the connected load and usable tray format differences between the CombiSteel EC1 (7500.0005) and a 4×GN 1/1 CombiSteel humidifier oven (7543.0020), with planning checks for Irish kitchens.

In this guide
When you choose a countertop convection oven, the decision is rarely just “how many kilowatts”. In a working Irish kitchen, what usually catches you is tray format, how much shelf space you can realistically use per batch, and whether the unit will physically fit on the counter.
This is a source-bound comparison of two CombiSteel tabletop ovens, using only their manufacturer PDFs:
- CombiSteel CUBE EC-1 (7500.0005): 2.67 kW, 4 grids, 435 × 315 mm grid size, convection-only (no moisture injection).
- CombiSteel Electric Convection Oven with Humidifier 4 × 1/1 GN (7543.0020): 2.9 kW, 4 × 1/1 GN capacity (stated), moisture injection.
What the manufacturer sheets let you compare safely is connected electrical load (kW), supply rating, external size for counter planning, tray or grid format, and basic internal geometry.
What they do not give you is measured energy use (kWh), efficiency, recovery behaviour, or real-world throughput. For that reason, we do not estimate running costs or output.
CombiSteel CUBE EC-1 (7500.0005): planning specs you can rely on
From the CombiSteel manufacturer sheet for 7500.0005, the EC-1 is listed as:
- Connected electrical load: 2.67 kW
- Supply rating: 230 V / 50 Hz
- Temperature range: +50 °C to +300 °C
- External dimensions (W × D × H): 595 × 530 × 570 mm
- Cavity dimensions (W × D × H): 460 × 375 × 360 mm
- Tray supports: 4 guide pairs, 55 mm guide distance
- Supplied shelves: 4 grids
- Grid size (W × D): 435 × 315 mm
- Functions: convection Yes; moisture injection No
Source: CombiSteel 7500.0005 (CUBE EC-1) specification sheet (PDF)
EC-1 “nominal tray rectangle”: a quick geometry check
You can use the stated grid rectangle as a rough planning reference for “how much flat platform exists per level”, without treating it as usable food area, safe load, or batch output.
- One EC-1 grid rectangle: 435 × 315 mm = 0.137025 m²
- Four grid positions (simple total): 4 × 0.137025 m² = 0.5481 m²
CombiSteel 4 × 1/1 GN convection oven with humidifier (7543.0020): planning specs you can rely on
From the CombiSteel manufacturer sheet for 7543.0020, the humidifier model is listed as:
- Connected electrical load: 2.9 kW
- Supply rating: 230 V / 50 Hz
- Temperature range: +50 °C to +250 °C
- External dimensions (W × D × H): 675 × 605 × 501 mm
- Cavity dimensions (W × D × H): 555 × 360 × 330 mm
- Net capacity: 65 litres
- Tray supports: 4 guide pairs, 75 mm guide distance
- Stated format: contents of GN 4 × 1/1
- Functions: convection Yes; moisture injection Yes; grill function No
Source: CombiSteel 7543.0020 (4 × 1/1 GN humidifier convection oven) specification sheet (PDF)
GN 1/1 rectangle reference (manufacturer-backed)
To keep the GN reference source-bound, we use CombiSteel’s own 1/1 GN grid dimensions:
- CombiSteel GRID SS 1/1 GN (7020.1200): 325 mm and 530 mm nominal sides.
One important detail: the accessory sheet labels these as “width” and “depth”, but that labelling does not establish how a GN 1/1 grid or pan is oriented inside 7543.0020. Here, we use the numbers only as a rectangle for nominal area comparison.
Source: CombiSteel 7020.1200 (GRID SS 1/1 GN) specification sheet (PDF)
EC-1 vs 4 × GN 1/1 with humidifier: what the specs actually let you compare
At-a-glance (manufacturer data)
Swipe or scroll horizontally to see all table columns.
| Spec | CombiSteel CUBE EC-1 (7500.0005) | CombiSteel 4 × 1/1 GN humidifier oven (7543.0020) |
|---|---|---|
| Tray format | 4 grids | 4 × 1/1 GN (stated) |
| Per-level stated rectangle | 435 × 315 mm | GN 1/1 reference rectangle: 325 × 530 mm (7020.1200) |
| Guide pairs / spacing | 4 / 55 mm | 4 / 75 mm |
| Cavity (W × D × H) | 460 × 375 × 360 mm | 555 × 360 × 330 mm |
| External (W × D × H) | 595 × 530 × 570 mm | 675 × 605 × 501 mm |
| Connected electrical load | 2.67 kW | 2.9 kW |
| Supply rating | 230 V / 50 Hz | 230 V / 50 Hz |
| Moisture injection | No | Yes |
Sources: CombiSteel 7500.0005 specification sheet (PDF), CombiSteel 7543.0020 specification sheet (PDF), CombiSteel 7020.1200 (1/1 GN grid) specification sheet (PDF)
Nominal tray rectangle comparison (planning only)
Using the manufacturer-stated rectangles:
- EC-1 grid: 435 × 315 mm = 0.137025 m² per level
- GN 1/1 reference rectangle: 325 × 530 mm = 0.17225 m² per level
Simple totals across four positions:
- EC-1 (4 grids): 4 × 0.137025 m² = 0.5481 m²
- 4 × GN 1/1 reference: 4 × 0.17225 m² = 0.689 m²
These are geometry references only. They are not usable food area, safe loading limits, efficiency metrics, or a guarantee you can run maximum pan size on all four levels at once.
Tray format is the real decision lever
Both units talk about “four levels”, but they’re built around different rectangles:
- EC-1: 435 × 315 mm shelves.
- 7543.0020: GN 1/1 format is stated.
If your kitchen is already organised around GN (prep, storage, service), staying with GN in the oven usually reduces friction day to day. If you already run 435 × 315 mm trays and you are tight on counter space, the EC-1’s format and footprint may suit better.
We do not label 435 × 315 mm as a GN fraction here. The supplied evidence does not include a standards table, so treat it as its own tray format unless your supplier confirms compatibility.
Two hypothetical procurement scenarios (using only published specs)
Scenario A (GN-led hot kitchen, humidity matters)
- You are standardised on GN 1/1 pans.
- You have about 700 mm width and 700 mm depth available on the counter.
- You want four GN 1/1 positions and would like moisture injection support for a mixed menu.
On published fit and function, the 7543.0020 is the cleaner shortlist. It’s W 675 × D 605 mm, explicitly states GN 4 × 1/1, and lists Moisture Injection: Yes. Connected load is 2.9 kW at 230 V / 50 Hz.
Scenario B (space-constrained café, existing trays are 435 × 315)
- You have a maximum of 600 mm width and about 600 mm depth on the counter run.
- You already use 435 × 315 mm trays.
- Humidity is not a must-have.
The EC-1 (7500.0005) fits the space check better on paper: W 595 × D 530 mm, with 435 × 315 mm grids supplied. Connected load is 2.67 kW at 230 V / 50 Hz.
The 7543.0020 is likely off the list early based on published external dimensions alone (W 675 × D 605 mm).
In both scenarios, a 230 V rating does not confirm installation suitability on your site. Final electrical and installation decisions need qualified sign-off.
If you want more context on how oven formats land in real kitchens, see this guide to comparing commercial oven formats.
Quick decision rule: choose the tray standard first, then the footprint
- If you need GN 1/1 continuity and want moisture injection, shortlist 7543.0020.
- If you need a compact countertop oven built around 435 × 315 mm shelves and convection-only cooking, shortlist 7500.0005.
If you are trying to plan batches around shelf positions and tray choice (without turning it into throughput maths), use: CombiSteel Oven Tray Capacity Guide.
If you want to cross-check the EC-1 listing (availability changes), see: Caterboss listing for CombiSteel EC1 Convection Oven (7500.0005).
FAQ
Is 2.67 kW “cheaper to run” than 2.9 kW?
Not on the evidence available. kW is the connected electrical load rating, not measured consumption. Actual kWh use depends on how you run the oven (preheat pattern, door openings, time held hot between batches, and what you cook). The manufacturer sheets for 7500.0005 and 7543.0020 do not include measured energy-use data, so you cannot make a supported running-cost comparison from these PDFs.
Do EC-1 grids “match GN” in a practical kitchen?
They are different rectangles. EC-1 shelves are 435 × 315 mm (model 7500.0005), while the manufacturer-backed GN 1/1 reference rectangle we use is 325 × 530 mm (CombiSteel 7020.1200 grid). In practice, assume different trays and a slightly different workflow unless your tray supplier confirms compatibility.
If the GN 1/1 rectangle is bigger on paper, does that guarantee higher output?
No. Rectangle area does not account for food height, airflow gaps, tray lips, cook times, or whether all levels can be used with full-size pans at the same time. Use the area calculation as a counter and tray planning tool, not a performance promise.
What does “moisture injection: yes” change in buying terms?
It tells you the 7543.0020 has a humidity function on the spec sheet, while 7500.0005 does not. What you cannot tell from the supplied documents is how the humidifier is controlled, what water requirements apply, or what maintenance it adds. If humidity is central to your menu, ask for the latest model documentation or written confirmation before ordering.
What’s the minimum you should confirm before purchase?
A few checks prevent most unpleasant surprises on Irish fit-outs:
- Tray compatibility: confirm the oven you’re ordering matches your day-to-day tray standard (GN 1/1 versus 435 × 315 mm).
- Counter fit: work from the manufacturer external dimensions (and allow for any space your installer or supplier advises, because the PDFs here do not state clearance requirements).
- Power at the install point: the sheets list 230 V / 50 Hz and connected load, but your electrician still needs to sign off the circuit and connection method.
- For 7543.0020: clarify what “moisture injection” means in practice for your site. The PDF confirms it exists, but not how it’s controlled or any water requirements.
Where the PDFs are silent, do not guess. Ask for the latest model-specific documentation before you finalise counters or services.