Guides · CombiSteel Knowledge Hub

CombiSteel Pizza Holding and Hot Cabinets for Pizzeria Lines: Choosing 7487.0125 vs 7487.0135

Guide for Irish pizzerias selecting CombiSteel hot cabinets. Compare workflow fit, footprint, GN format, and electrical load using verified Caterboss specifications.

CombiSteel Hot Display 50 Litre
CombiSteel Hot Display 50 Litre (7487.0125). Product image: Caterboss. Image source ↗
In this guide

You are choosing a countertop hot holding display to keep service moving without giving away half the counter or overloading the electrics. This guide compares two CombiSteel options listed by Caterboss that often suit Irish pizzeria counters: the enclosed Hot Display 50 Litre (7487.0125) and the Hot Display 4 × 1/3 GN Curved (7487.0135).

Caterboss lists both models with a 30 to 90°C temperature range and a 230V / 0.8 kW connected load. That gives you the equipment envelope for line planning. Your actual hot-holding limits still need to come from your own HACCP controls and the Irish guidance you follow.

Where countertop hot holding helps on a pizza line

Hot holding earns its place when the pinch point is handover at the counter, not oven capacity. If your oven output arrives in bursts, a small buffer can take pressure off the pass during lunch spikes, match days, and the Friday rush.

The trade-off is quality versus dwell time. Pizza and sides can dry out or soften quickly, especially with frequent access. The better unit is the one that matches how you portion, batch, and rotate, not the one with the biggest headline capacity.

7487.0125 vs 7487.0135: the decision in plain terms

You are mainly choosing between:

  • An enclosed, grid-and-door cabinet (7487.0125), or
  • A GN-format curved tabletop hot display built around 4 × 1/3 GN pans (7487.0135).

That choice shows up in daily flow: how you separate products, how predictable portioning is, and how much counter width you give up.

Verified spec comparison (from Caterboss)

Swipe or scroll horizontally to see all table columns.

Spec7487.0125 Hot Display 50 Litre7487.0135 Hot Display 4 × 1/3 GN Curved
FormatCountertop hot display cabinetTabletop hot holding display
Capacity format50L gross, 2 interior grids4 × 1/3 GN, GN pans included
Temperature range30 to 90°C (listed as adjustable warming)+30 to +90°C (listed temperature range)
Electrical230V, 0.8 kW230V, 0.8 kW
External dimensions(H) 376 × (W) 554 × (D) 361 mm(H) 270 × (W) 840 × (D) 395 mm
Access detail (listed)Right-hand windowed doorNot specified on listing
GN depth limitNot specified on listingMax GN container depth: 40 mm
Warranty (listing)1 year parts-only1 year parts-only

Sources: Caterboss listings for 7487.0125 and 7487.0135.

Workflow fit: what each unit is good at

7487.0125 (50L enclosed, 2 grids, right-hand windowed door)

This is the simpler option when you want a compact, enclosed hot hold point on the pass. Caterboss lists a right-hand windowed door and two interior grids, which suits staff-served holding where you want food inside the cabinet between picks.

What the Caterboss listing does not confirm is internal shelf size, shelf spacing, or exact tray compatibility. If you need it to take a specific tray or container format, check the manufacturer documentation before you commit.

7487.0135 (4 × 1/3 GN curved tabletop unit, max 40 mm GN depth)

This model is defined around four 1/3 GN pans, and Caterboss states the GN pans are included. In a pizza operation, that suits portion-led holding where you want clear lanes for sides or portioned items.

The key constraint is the listed 40 mm maximum GN container depth. In practical terms, it pushes you towards shallow holding and more frequent top-ups. That can support quality, but it limits the buffer you can build during a rush.

If you are standardising your line around GN containers and lids, map what you already own before you buy. Use our GN and bakery tray sizes guide to sanity-check fit with your current prep containers.

Layout and electrics: what usually decides it on Irish counters

Counter space

  • If width is tight, 554 mm (7487.0125) is easier to place than 840 mm (7487.0135).
  • If you have a 900 mm run available, 840 mm will fit, but it leaves limited room for what tends to build up beside it in real life: bagging and boxing space, a landing area, and cable clearance.

If you are planning the full pass, not just one unit, start with the pizzeria work line planning guide. Most hot-holding mistakes happen when the counter is planned as separate boxes rather than one working line.

Electrical headroom

Both models are listed at 0.8 kW, 230V. That is a useful planning number for circuit loading, but it is not a running cost.

  • One unit: 0.8 kW (connected load on paper).
  • Two units: 1.6 kW combined, before anything else sharing that circuit.

This is planning guidance only. Caterboss provides connected load, not a guarantee of what else is already on your circuit.

Temperature range: useful capability, not a compliance statement

Caterboss lists both units with a 30 to 90°C temperature range (with 7487.0125 described as adjustable warming). That flexibility only pays off if your team is consistent about batching and rotation.

The Caterboss listings do not state Irish hot-holding compliance temperatures for specific foods. Treat the range as the equipment’s capability. Set your actual food safety targets through your HACCP controls and whatever Irish guidance you use, and verify the food itself during service.

Worked example (hypothetical): one counter position, mixed slices and sides

Scenario inputs (hypothetical):

  • Deck oven output: about 20 × 12" pizzas per hour at peak.
  • Service: staff-served slices at the front counter, plus hot sides (garlic bread, wedges, wings) for collection.
  • Holding goal: keep 8 slice varieties and 3 sides visible and ready for 20 to 30 minutes between bakes.
  • Space: 900 mm width available on the customer-facing servery, 600 mm depth.
  • Electrical headroom: 1.5 kW available on a dedicated 230V supply for hot holding.

What the verified specs imply:

  • You cannot run both 7487.0125 and 7487.0135 together within 1.5 kW, because the listed loads are 0.8 kW + 0.8 kW = 1.6 kW.
  • If your priority is structured portion holding for sides, 7487.0135 gives you four defined 1/3 GN positions with GN pans included. The trade-off is the stated max 40 mm GN depth, so your buffer depends on frequent replenishment.
  • If your priority is keeping the counter compact for boxing and handover, 7487.0125 is easier to fit at 554 mm wide and is listed with two interior grids behind a right-hand windowed door. The trade-off is you are not buying a defined GN layout, and internal tray compatibility is not confirmed on the listing.

Bounded decision:

  • Choose 7487.0135 if your counter needs defined GN lanes for portioned items, and you accept that shallow GN depth means more top-ups.
  • Choose 7487.0125 if you need the width back for service flow, and you want a straightforward enclosed hot hold point.

Next step: shortlist alternatives in the same category

If neither format lands cleanly for your counter, compare other sizes and layouts before you redesign the line around the wrong footprint.

Browse Caterboss’s food display cabinets category to compare other countertop formats and footprints.