Cooking · CombiSteel Knowledge Hub
Will Your Pans Work on the CombiSteel 7020.0130 Induction Hob?
Find out which pans work with the CombiSteel 7020.0130 induction hob, the manual’s diameter limits, and what error codes E0 to E3 actually mean.

In this guide
If your CombiSteel 7020.0130 shows E0, the manufacturer links that code to cookware detection. For this model, the manual is clear on the basics:
- Your cookware must be induction-suitable (the manual lists acceptable materials).
- It must be within the stated utensil diameter range for the unit.
- It must be flat-bottomed.
Everything below sticks to the 7020.0130 (2024) manual for confirmed limits and fault meanings, and flags where retailer copy conflicts with the manufacturer instructions.
If you’re unsure you have the right revision for your exact item code, use our guide to find a CombiSteel manual by model number before you standardise pans or change how the station is used.
Introduction to pan compatibility
On induction, “compatible” simply means the hob can detect the pan and transfer energy into it. With the CombiSteel 7020.0130, the lowest-risk way to choose pans is to follow the manual’s usable and non-usable pan list, and its utensil diameter limit.
What “compatible” means on the CombiSteel 7020.0130
The 2024 manual specifies the following.
Usable pans (materials, base type, size)
The manual lists:
- Steel or cast iron
- Enameled iron
- Stainless steel
- Flat-bottom pans / pots
- Diameter from 12 to 26 cm
Source: Manual 7020.0130 (2024) PDF (p.4).
Non-usable pans
The manual lists:
- Heat-resistant glass
- Ceramic container
- Copper
- Aluminum pans/pots
- Rounded-bottom pans/pots with bottom measuring less than 12 cm
Source: Manual 7020.0130 (2024) PDF (p.4).
The 12 to 26 cm limit and the “280 mm” conflict
For buying decisions, the manufacturer manual is the safest reference point. For the 7020.0130, it states “diameter from 12 to 26cm” (Manual 7020.0130 (2024) PDF).
Some retailer listings describe the unit as taking 280 mm (28 cm) cookware, including the Caterboss product page for this model (CombiSteel induction 3500W cooking top (7020.0130)). That conflicts with the manual.
The supplied evidence does not define whether the manual’s “diameter” refers to rim diameter, base diameter, or contact-ring diameter. Treat 28 cm as unconfirmed for this model unless you get written confirmation that explicitly references 7020.0130 and explains how “diameter” is measured.
Practical buying approach: if you’re standardising cookware for this hob, buy within 12 to 26 cm unless your supplier can confirm, in writing, that 28 cm is supported for the 7020.0130.
CombiSteel 7020.0130 power settings (what’s confirmed)
On the CombiSteel 7020.0130 you select a power step. The 2024 manual lists:
- Power Rate: 500 W to 3500 W
- Selectable power steps: 500, 800, 1000, 1300, 1500, 1800, 2000, 2300, 2500, 2700, 2900, 3100, 3500 W
Source: Manual 7020.0130 (2024) PDF (p.3).
Understanding induction hob error codes (7020.0130)
The 2024 manual gives distinct meanings for E0 to E3, with different responses for each.
First: safety and operator limits (from the manual)
- The manual states: “Do not move the cooker together with a pot.” (Manual 7020.0130 (2024), p.3).
- The manual states: “Do not open the cooker to replace spare parts by yourself.” (Manual 7020.0130 (2024), p.3).
- The manual states: “Do not heat a pot empty or overheat to avoid dry boiling.” (Manual 7020.0130 (2024), p.3).
E0: no pan detected or unsuitable cookware
Meaning (manual): “No pan on the hob or not suitable cookware.”
What to do (manual): “Place the appropriate cookware with food on the hob.” Then try again (Manual 7020.0130 (2024), p.5).
In practice, “appropriate cookware” here means staying inside the manual’s usable list (materials, flat bottom, and 12 to 26 cm diameter).
E1: the device has heated up extensively (or parts may be damaged)
Meaning (manual): The device heats up extensively (for example due to covered ventilation slots). The manual also flags possible damaged parts (example: transistor).
What to do (manual): Clear the ventilation slots and let the device cool off for a few minutes. If the error code is displayed when the device has cooled off, contact your dealer (Manual 7020.0130 (2024), p.5).
E2: overheating protection has activated and the unit will switch off
Meaning (manual): Overheating protection is on and the device will switch off.
What to do (manual): Pull the plug from the socket, remove the cookware from the hob, let the device cool off for a few minutes, then restart the device (Manual 7020.0130 (2024), p.5).
E3: short power interruption
Meaning (manual): short lasting power cut.
What to do (manual): Pull the plug from the socket. After a few minutes, plug in the device again. (Manual 7020.0130 (2024), p.5).
Real-world buying notes (Irish kitchen context)
Countertop induction hobs like this often become the extra ring for prep, service, or events. That’s also when mixed cookware can turn into delays.
To keep the station predictable:
- Keep a small, dedicated pan set for the hob, using the manual’s usable materials and the 12 to 26 cm utensil diameter limit.
- If you need a specific pan size outside that range, treat it as a spec check, not a guess. Get written confirmation for the 7020.0130.
If you’re regularly trying to push several high-demand jobs through a single countertop induction unit, it may be a line-planning issue rather than a pan issue. Our guide on planning a commercial cooking line can help you map the workload.
Worked example (hypothetical 28 cm pan)
A frying pan is sold as 28 cm. You want to know if it’s a safe buy for a 7020.0130.
- The manual states “diameter from 12 to 26cm” (Manual 7020.0130 (2024), p.4).
- A retailer page may claim 280 mm, but that conflicts with the manual for this model.
Because the manual does not define how “diameter” is measured, you cannot treat an alternative measurement as approval. If 28 cm matters to your menu, get written confirmation of suitability for the 7020.0130 before you buy a full set.
Next step
For faults, follow the meanings and response order in the 7020.0130 (2024) manual first. For cookware, stay inside the manual’s 12 to 26 cm utensil diameter range and the listed usable materials.
If you need to cross-check how the product is being described at retail, use the Caterboss 7020.0130 product listing.